|
M2 Screws |
|
|
Autodesk Fusion 360Autodesk
|
|
|
Fresnel Lens, Custom Cut |
The PsuedoPancakes v2: WE MUST GO HIGHER
To learn more, please check out my Hackaday!
https://hackaday.io/project/187343/log/227827
There are a few upgrades made within this design! Let's go over a few;
- Thanks to Summer (https://github.com/SummerSigh) (Who is also working on something you guys will see soon), the lens module now uses M2 screws instead of any epoxies or glues! The lens also pop in instead of needing to be glued in!
- The rod system now has a knob (Even though I am realizing upon texting that it is within the wrong rod, fix coming soon
- Actual side pieces (Which you should place on the headset within your own 3D stuff)
- The design is now cleaner, having proper curvature and being built on Fusion instead of Tinkercad
- Everything overall fits more snug
- The headset size has been reduced slightly
There are still a few problems here and there with the design but once the rod pieces are fixed, it is ensured that nothing is blocking it and the side pieces are properly placed it should not be anything which permanently stops you.
Aside from that, I am still working on fixing the LCD borders being visible while adding eye tracking (powered by ETVR) and mouth tracking (Powered by Babble). The new test lens have yet to appear but I also have a polarizer which should increase the already very good image quality!
Finally, you can get the file printed here;
https://www.pcbway.com/project/shareproject/The_PsuedoPancakes_v2_WE_MUST_GO_HIGHER_6503651f.html
And donate to my Patreon (I'm lowkey going broke working on these);
https://www.patreon.com/user?u=98752242
Once done, I expect the FOV to be around 100 degrees +
The project file is on Hackaday!
The file for the lens is still "PsuedoPancakes v2.svg" on Hackaday but please buy the lenses from here from now on!
The PsuedoPancakes v2: WE MUST GO HIGHER
*PCBWay community is a shared platform and we are not responsible for any design issues.
- Comments(0)
- Likes(0)
- 0 USER VOTES
- YOUR VOTE 0.00 0.00
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
More by Walker Dev
- The PsuedoPancakes v2: WE MUST GO HIGHER To learn more, please check out my Hackaday!https://hackaday.io/project/187343/log/227827There are a...
- The PsuedoPancakes: A Low Cost, Open Source Alternative To Fresnel and Pancake Lens for $20 UPDATE: THE v1 IS NOW SUPERSEEDED BY THE v2, VIEW IT HERE!https://www.pcbway.com/project/shareprojec...
-
Robot with WiFi control and servos driven by ESP32
9 0 0 -
Commodore 1551 Drive Cartridge Replacement
156 0 2 -
RCMHardwareByte-v2.3
111 0 0 -
Terminal Curiosity PCB Ruler
329 0 1 -
(DIY) COMMODORE 64 DEAD-TEST (781220) DIAGNOSTIC CARTRIDGE
369 0 2 -
Creative Micro Designs Inc. CMD FD-2000 / FD-4000 3D Printable Case
404 0 0 -
Creative Micro Designs Inc. CMD FD-2000 / FD-4000 Metal Case
578 0 0 -